SBZ145

Profile machining centre

Designed for the requirements of metal construction and industrial use, the SBZ 145 with its 5 processing axes offers a processing area of 560 mm x 350 mm x 7,500mm. Equipped with an autonomous clamping axis and a generously designed tool magazine for milling cutters, drills, thread cutters and saw blades. The SBZ 145 has numerous processing options for cutting from the profile bar with processing or optionally in pendulum operation with processing of pre-cut individual parts (2x 3.250mm).

Machining Centres SBZ 145 Two separate workzones elumatec
Machining Centres SBZ 145 For metal construction and industrial use elumatec
Machining Centres SBZ 145 Viewing window elumatec
Machining Centres SBZ 145 Protection of profile surface elumatec
Machining Centres SBZ 145 Bar processing elumatec
Machining Centres SBZ 145 Tool magazine elumatec
Machining Centres SBZ 145 Robust and stable portal design in modern appearance elumatec
Machining Centres SBZ 145 Sawblades elumatec
Machining Centres SBZ 145 Optimized processing cycles elumatec
Machining Centres SBZ 145 Fast and easy clamp positioning elumatec
Machining Centres SBZ 145 Low machine hight elumatec
Machining Centres SBZ 145 Clean and efficient solution for waste pieces elumatec
Technical data arrow_drop_down
LAYOUT 

The overall dimensions and the weight may vary depending on the product configuration

AXIS STROKES 
X AXIS (mm)
7.500
Y AXIS (mm)
1.300
Z AXIS (mm)
730
A AXIS
-110° / +110°
C AXIS
-182° / +182°
ELECTROSPINDLE 
Maximum power in S1 (kW)
11
Maximum speed (rpm)
24.000
Toolholder cone
HSK 63F
OPERATING MODE 
Pendular mode with 2 lefthand materialstops
 
Bar processing
 
SAFETY DEVICES AND PROTECTION 
Side access guard (fence / protective panel)
 
Access protection frontside (Light curtain / laser)
 
Protective device rear side (fence)
 
MACHINING FACES 
With direct tool (front/top/back, ends)
5
WORK AREA 
AUTOMATIC TOOL MAGAZINE 
Tool magazine traveling along
 
U AXIS (Tool changer)
 
Magazin Type: linear tool changer
 
Number of tools in the standard magazine
18
Number of special tools in the magazine: lame
2
Tool position level 1 (up to D=100mm and L=210mm)
6
Tool position level 2 (up to D=63mm and L=210mm)
6
Tool position level 3 (up to D=63mm and L=145mm)
6
WORKPIECE LOCKING 
V AXIS (Autonomous clamp positioning)
 
Number of clamps
8
Number of additional clamps with max. travel
2
PROFILE POSITIONING 
Number of material stop (clamping position left)
2
Material stop in position 2 (connected to the clamp)
 
Included       
Available

Other Products